ZVA Automatic AdBlue Nozzle

The Type-C Manager Key is a battery-powered memory device designed by Piusi to download dispensing data from the control units of the Self Service 2018 family dispenser and bring them into the Self Service Management 2018 PC software. The manager key is required to register the user keys and allocate them to a driver or vehicle, and is also required to download the transactions to a computer if the Self Service Desk fuel management software is purchased.

The Piusibox Portable 24v AdBlue™ Pump is a ready to dispense, portable pumping solution in a sturdy pull along box. This AdBlue™ transfer pump kit comes complete with delivery hose, manual nozzle, suction hose with strainer, providing the user with everything they need for the mobile refilling of their vehicle.

As its suction hose can be easily dropped into either a drum or IBC, the Piusibox AdBlue™ pump is ideal if there are multiple different containers on site. Thanks to its 2m cable and clips for connection to the vehicle’s battery, it does not need mains power to operate which has seen it become a popular solution in the agricultural and construction markets.

This Piusi pump’s protective box helps prevent contamination and aids transportation in heavy duty environments. To further prevent contamination, it comes with an AdBlue™ long life filter for removing any impurities and a pair of gloves.

The Hytek SPT60A Diesel Transfer Pump is a low cost, high quality Fuel pump. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 56 Litre per minute maximum flow rate, the SPT60A from Hytek is an economical choice for diesel transfer.

Hytek 230v Diesel Pump Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: 30 minutes

56 L/min maximum flow rate

Integral Bypass valve

Suitable for Diesel or Biodiesel

2 Year Warranty

SAMOA Reelmaster RM-100 heavy-duty large capacity hose reel for lubricants and waste oil evacuation.

• Very tough construction able to stand regular use and abuse in Intensive Duty applications.
• Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose.
• Full port shaft and swivel for no restrictions.
• Spool mounted on two permanent lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life.
• Large effective radial latching area for easier operation.
• Hose guide arm can be placed in different positions to accommodate any method of mounting.
• Narrow footprint allows accommodating more reels on the same surface.
• Hose reels with hose include 0.8 m inlet hose.

Hose length: 15 (1"), 20 (¾"), 25 (¾") or 30 (½") metres

Hose Internal Diameter: 1", ¾" or ½"

Connecting Hose Inlet: 1" BSP (F)

Delivery Hose Outlet: 1", ¾" or ½"

Pressure Rating: 90 bar (1"), 100 bar (¾") or 160 bar (½")

Weight: 55-57kg (with hose)