The CTS Mains Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a tank overfill, a high/low liquid level and a bund leak. If this fuel tank alarm identifies any of these issues, the zone in question will light up on the alarm’s screen, combined with an alarm sounder and flashing orange strobe, which provides the user with a clear warning of the activated tank state. Each zone can be configured in any of the three functions High, Low or Bund, enabling the complete customisation of these fuel tank alarms based upon the user's requirements with a very simple set of electrical jumpers.

Options are available complete with three relays, to allow external equipment to be connected to each zone of the tank level alarm such as building management system for remote monitoring. This level and bund alarm also has the additional feature of controlling the pump from the relays (if fitted). When the fuel storage tank contents are 'low', the pump switches on and stays on until 'high' is reached.

If you require a tank level alarm for something other than diesel or light oil, we also supply a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.

The Husky Safe-T-Break® couplings are designed to disconnect the refuelling system, so that the hose breaks off from the pump in the event where a vehicle drives off with the nozzle still attached to the fill point.

These Safe-T-Breaks® stop the whole pump system being pulled away from the installation, therefore preventing fuel from spilling out onto the forecourt. This type of Husky breakaway coupling is re-usable, and can therefore help to prevent damage and fuel spillages again and again. Watch this video on how to reconnect the coupling. 

The standard models of the Safe-T-Break® couplings are designed for use with diesel, with a 1" ATEX approved version available for petrol.

The Husky VIII Diesel Nozzle is a durable and heavy duty automatic shut off nozzle, designed for the high flow refuelling of large agricultural and plant machinery. Thanks to its incorporated Flo-stop® device, the VIII Husky fuel nozzle shuts off the flow of fuel when the spout is raised above the horizontal or fall from the fill point. This fuel nozzle benefits from a reinforced spout bushing and a sensing port located behind the spout end, ensuring that even after a lot of use, the spout doesn’t get worn causing nuisance click offs.

A further useful feature of the VIII Husky nozzle is its dual poppet, which enables the easier opening of the automatic fuel pump nozzle when high system pressure is present due to the high flow. Please note models with swivel may have a reduced flow rate. If you want to guarantee achieving 250lpm, an optional high flow swivel is available.