Our Steel Bunded Diesel Dispensing Tanks are perfect for commercial fuel installations. This 5,500 litre capacity Steel Bunded Diesel tank is manufactured by us, in the North of England.

The TEB5400 comes as standard with a secure, sumped lockable cabinet with steel doors & are manufactured from high quality mild steel plate to BS EN 10025.

The outer tank holds a minimum of 110% of the inner tank to comply with all current legislation & comes with a 10 year guarantee, though if properly maintained, the TEB Diesel Tanks are built to last over 30 years.

This 5,500 litre Diesel Tank can be be fully bespoke built, whether it's a different inlet / outlet, higher flow pump, hose reels or even a split compartment to allow storage of other fluids like DEF within the same tank. We can also adjust the Length, Width or Height to suit your requirement. Please contact us to discuss options & get a quote.

Standard Spec -

Bund & Contents Gauge

2" BSP Fill Point with Cap & Non return valve

Tank Vent Cap

Service Hatch

Base Plinths

High Security Sumped Cabinet with Lockable Steel Doors

Lifting Points

BS381C 226 - Green (Any colour available on request. Marine grade paints available)

10 Year Guarantee (life expectancy over 30 years if properly maintained)

Contact us if you would like a quote for this tank & let us know if you'd require any changes / additional items

Compliancy -

BS799 part 5

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Mild steel rigid bunded container with steel portable bund fully welded with mechanical handling base and top lifting facility.  Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.

The unit is manufactured with an integrally bunded tank with capacity to hold an additional 10% of the total liquid being stored which is then fitted within a steel outer bund providing a secondary bund to the main storage tank. A bulk head is fitted in front of the storage tank to provide an area in which all the tanks control and dispensing equipment is housed.  A steel roller shutter door is provided for increased security

These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

Compliancy:

BS799 part 5,

Control of pollution (oil storage) (England) regulations 2001

PPG2

PPG26

Harlequin Fuel Stations are the ultimate in diesel dispensing tanks and technology. Featuring forecourt style refuelling convenience and a range of added value technologies as standard, these high specification fuel tanks provide complete diesel storage and dispensing solutions

This 7500-litre Fuel Station is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a high-speed fuel pump.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Fuel Management System (240V only)*

10Micron particulate & water filter

6m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

*110V, 12V, 24V fuel pumps available. 72L/min fuel pump & fuel management system available in 230V only. Low voltage tanks have a mechanical flow meter in place of the fuel management system.

Optional Extras (Additional Cost):

72L/min fuel pump

Installation:

Base Length: 2,940mm

Base Width: 2,305mm