Stainless Steel Hose Tail

The K24 Flow Meter is a digital flow meter with a turbine suitable for AdBlue monitoring and the digital management of the fluid being dispensed.

PRECISION AND QUALITY

The K24 digital AdBlue flow meter has been designed to monitor the flow of AdBlue. Easy to install, in-line or at the end of the dispensing pipe, The K24 has a display that can be applied in various positions to facilitate easy reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually all working conditions.

RELIABILITY

The K24 Digital Flow Meter has a plastic body with a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with an LCD display shows a partial reading of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 litres per minute.

The K24 AdBlue flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, the K24 can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, the K24 can be adapted to any application and working condition.

The Piusi Ocio Desk Fuel Tank Gauge software gives the user the ability to connect new or existing Ocio gauges directly to the PC by means of a USB interface. Depending upon the version selected, the Piusi Ocio Desk software can connect up to 12 Ocio contents gauges, enabling the user to view the tank levels in percentage, level or volume at the convenience of their own desk. This Piusi fuel tank gauge software also displays both current and historic tank level data graphically, which can be used to identify any unusual results. For added usability, the software can be set up to update at a specified time interval or variation in the tank level or volume. 

The Piusi Stainless Steel Rotary Hand Fuel Pump is a new generation solution, acting as more sturdy and durable option for manually dispensing diesel and oil from a drum. This premium self-priming manual fuel transfer pump has a stainless steel outer casing and benefits from smooth operation thanks to its rolling handle grip and quality constructed internals. 

The inlet of this diesel hand pump benefits from a grooved locking mechanism for securing it onto the drum connector. This is to stop it from spinning on the drum whilst in operation; a problem common with cheaper solutions.

Available is a version of this hand fuel transfer pump with 3m delivery hose for dispensing directly into the vehicle, which comes with a swivel spout with on/off valve to close off the hose when delivery has finished to prevent spillage. There is also a version of this Piusi fuel pump without hose that has an “S” type spout that is ideal for dispensing straight into an oil jug.

Manufactured in Italy by Piusi is the Booster 60:1 Mobile Air Operated Grease Drum Pump Kit; part of their growing range catering for the lubrication market. This mobile grease transfer pump kit is a ready to dispense solution and comes with a grease gun, 4m delivery hose, drum cover and follower plate. This grease pump kit also comes with a 2 or 4 wheeled drum trolley (depending upon drum size), for easy manoeuvring of the pump around the workshop.

Thanks to its enhanced durability and low noise operation, this Piusi pump is ideal for those working in garage and workshop environments.