Stainless Steel Barrel Nipple

The Piusi E300 Diesel Transfer Pump is a self-priming, electric pump specifically designed for the high flow transfer of diesel. Being mains-powered, this Piusi diesel pump is ideal for static installations where high quantities of diesel need to be dispensed quickly for example decanting from one fuel tank to another. This has therefore been a popular electric fuel transfer pump solution for tank engineers and suppliers needing to drain an existing tank of diesel before decommissioning it and installing its replacement.

The incorporated check valve in the suction port ensures that this diesel fuel transfer pump is protected against the siphoning effect and guarantees automatic re-priming once it has been initially primed.

The Piusi SEC IBC Connectors have been designed by Piusi to overcome issues associated with the traditional lever based CDS connector.

These IBC connectors work by screwing the valve open/closed without acting any angular pressure on the IBC connection point. Once connected, the SEC valve ensures that the AdBlue™ is not contaminated by the surrounding environment of the IBC tank. These come as standard with the Suzzara Blue IBC AdBlue pump kits.

The Adam Pumps PA1 70 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 66 Litre per minute maximum flow rate, the PA1 70 from Adam Pumps is an economical choice for diesel transfer.

Adam Pumps 230v PA1 70 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

70 L/min maximum flow rate

Max pressure: 2 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year Warranty