Samoa Waste Oil Gravity & Suction Collection Units

The Ultraflow Cast Iron Rotary Hand Fuel Pump is an economical and simple solution for the manual dispensing of diesel and oil primarily from a drum, but also from other types of storage tanks. These rotary vane type hand fuel transfer pumps are a popular choice for transferring fuel when cost effectiveness is important, when only small quantities need to be dispensed at a time, or when no mains power is easily available. This manual diesel transfer pump is supplied with a 2” M BSP drum adaptor and three part rigid suction downtube.

The Piusi K700 mechanical fuel flow meter uses an oval gear system to accurately measure the amount of diesel dispensed, even at higher flow rates, which is indicated on its large mechanical display. Thanks to its maximum flow rate of 220lpm, the K700 fuel counter meter is designed for higher flow applications where larger volumes of fuel may be required to be transferred. Manufactured in Italy by Piusi, this diesel flow meter is a durable solution that is easy to fit and calibrate, and comes complete with an inlet filter for removing large debris.

The diesel fuel flow meter’s body can also be rotated to allow the flow from four directions, which makes this Piusi flow meter a flexible solution for a range of installations.

The Hytek SPT60A Diesel Transfer Pump is a low cost, high quality Fuel pump. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 56 Litre per minute maximum flow rate, the SPT60A from Hytek is an economical choice for diesel transfer.

Hytek 230v Diesel Pump Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: 30 minutes

56 L/min maximum flow rate

Integral Bypass valve

Suitable for Diesel or Biodiesel

2 Year Warranty

Part of the ALPHA family of fuel dispenders, the ALPHA Petrol pump is a forecourt sytyle petrol dispenser designed for refilling fleets of vehicles.

The unit can easiliy be connected to an externam fuel management system, or be supplied with the comprehensive FC10 management system. Please contact us for a quote.

ALPHA Petrol specification -

1450mm H x 550mm W x 490mm D

4 Piston meter (+/- 0.25% accuracy)

Belt driven ATEX petrol pump

Stainless steel cabinet with seperate top housing for display

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres

10:1 or 100:1 Pulser output for simple connection to fuel management systems

3.66m Steel braided fuel hose (12ft) (Nozzle not included)