Samoa Suction Waste Oil Extractor - Transparent Chamber

The MT Profil Fuel Tank Float Gauge from Afriso is a small mechanical clock gauge for measuring the tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge. The small display shows a scale of Empty 1⁄4, 1⁄2, 3⁄4 and Full for factory calibrated versions, allowing the user to quickly identify the approximate fuel tank level.

This oil tank level gauge is available in different versions depending upon the specific height of the fuel tank, or there is an 8'0 adjustable version. The 8'0 adjustable version of the MT Profil oil tank float gauge displays the level reading in cm, and has a reversible display which goes to 150cm max on one side, and 250cm max on the other.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum. If your tank has a 2" BSP hole, you can fit this gauge by purchasing a 2" x 1 1/2" reducing bush. If your tank has a vent hole, you can connect the gauge by fitting a 2" barrel nipple into the hole and adding a combi vent cap which has a 1 1/2" BSP thread to screw in the gauge to prevent an additional hole being drilled.

The Cim-Tek Hydrosorb Fuel Tank Filter is an industry known filter that removes water and particles up to 10 micron by trapping it in its resin coated pleated paper element. These fuel storage tank filters have a spin on cannister element, enabling the diesel filter element to be easily removed and replaced once it becomes full. The Cim-Tek fuel filter can be easily fitted to the suction or delivery of a pump installation on storage tanks for refuelling vehicles, lorries, agricultural and plant machinery. 

The Cim-Tek 70063 fuel tank filter is designed for higher flow rate pump systems up to 110lpm. If a lower flow version of this Cim Tek Hydrosorb filter would be more suitable for your application, see the 70062 filter.

Cim-Tek Hydrosorb fuel tank filter includes two parts, static filter adapter (head) and an element. The All Cim-Tek filter components, including the replacement Cim-Tek 70063 element, are available individually as replacements.

SAMOA Solura Blue 230v 50Hz AC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable with plug.

Electric motor power: 400w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 30 l/min

The Parker Carbopress Diesel Delivery Hose is a well-known brand of strong and durable fuel hose. Usually supplied as standard on the Piusi pump kits e.g. Cube, ST and Drum range, this diesel hose is often purchased as a replacement for an existing pumping installation. The Parker fuel dispensing hose is available in 4m and 6m assemblies as standard, but can also be purchased in coils or by the metre should you have differing requirements. A petrol version is also available.