Samoa Reelmaster Double Arm Oil Hose Reel - 15m

The Stainless Steel Basket Strainer can be fixed to suction lines or non return valves, to filter any large particles that may damage the components in chemical systems. These basket strainers are constructed of heavy duty stainless steel, and have machined turned threads.

The Aluminium Fuel Tank Vent Cowl is designed to fit over the male thread on the top of an above ground storage tank to provide ventilation. These vent cowls come three lugs for direct fitting, one with an Allan key screw fitting to help secure the cowl to the male thread of the tank.

This Cim-Tek Filter Element is a replacement, 30 micron element for the Cim-Tek Hydrosorb fuel storage tank filter. This fuel tank filter element can be easily replaced to remove water and debris out of fuel continually.

This element is suitable suitable for the 70067 Cim-Tek Filter.

The Filstop 2" Overfill Prevention Valve is designed to act as the fill point for both metal and plastic tanks. The valve physically closes the inlet to the tank when the fuel level inside reaches it's maximum during a fuel delivery. This prevents damage to the tank, and environment as well as the costs associated with cleaning spilt fuel.

The steel tank version screws straight into the 2" BSP Inlet, whereas the plastic version requires a hole to be cut into the top of the tank for fixing via locknut.

Maximum Flow Rate – 580lpm

Minimum Flow Rate – 50lpm

Leak Rate when closed – 2.5lpm

Max Working Pressure – 7 Bar (Tested to 8 bar)

Max Spike Pressure – 12 Bar

Min Working Pressure – 0.15 bar

Tank Fitting – 2″ BSP Parallel Male Thread