Samoa Polaris 70 Wall Mounted Diesel Pump Kit

The Husky high flow swivel is used on nozzles when the maximum flow rate that the nozzle is able to achieve needs to be guaranteed – for example, the Husky VIII nozzle.

High flow nozzles such as the Husky VIII Diesel Nozzle are often used for refuelling large plant equipment, agricultural machinery and lorries, and the user may therefore need to maintain the flow to fill the fuel tank as quickly as possible.

This high flow swivel has been designed so that flow rates of up to 378 lpm can be achieved, whilst also allowing free movement to the nozzle. 

This ready to fit fuel hose and nozzle kit comes with a Piusi Standard Auto 60 nozzle and premium diesel delivery hose, making it the ideal solution for when the hose and nozzle on existing fuel dispensing pumps needs replacing. Suitable for use with both diesel and oil applications, this fuel tank hose and nozzle comes in two different hose lengths for you to choose from – 4 or 6 meters.

The Auto 60 fuel pump hose and nozzle kit comes with an automatic fuel nozzle from Italian manufacturer Piusi, which shuts off when the vehicle tank being filled is full. This, combined with a premium hose and assemblies, with swaged stainless steel full ferrules and BSP hose tails with sealing o ring, makes for a premium solution for a replacement diesel nozzle and hose.

The Piusi Shark (SQUALO35) AdBlue pump is the first submersible pump specifically designed  for dispensing AdBlue™ from an AdBlue™ tank, rather than for water transfer. Firstly, it's 35lpm flow rate is the proven speed in the market for refilling vehicles and off road machinery with AdBlue, due to the smaller tank size than diesel. Also, thanks to its integrated bypass valve, this submersible AdBlue pump can be used with a nozzle without the added cost of buying a pressure relief valve. 

Reduced overall dimensions guarantee easy installation of this compact electric AdBlue™ pump, ideal for when there isn't room for a pump in the tank cabinet. The low 30mm suction level of the Shark offers almost complete emptying of the tank, exceeding that of alternative submersible AdBlue Pump models, and has a strainer to remove any debris that may have entered and sank to the bottom of the tank to prevent it from entering the pump or the vehicle SCR system. Thanks to it being a regenerative turbine pump, it benefits from pressure building capabilities ten or more times that of a centrifugal pump with the same impeller diameter and speed.The Piusi Shark also has a built in pressure regulator that optimises flow rate to reduce unnecessary energy consumption, saving the user on energy costs.

A version of this Piusi pump is available with a 6 minute timer, to prevent the pump from dry running damage in the event of the user forgetting to turn it off when they have finished dispensing. 

The Adam Pumps PA1 70 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 66 Litre per minute maximum flow rate, the PA1 70 from Adam Pumps is an economical choice for diesel transfer.

Adam Pumps 230v PA1 70 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

70 L/min maximum flow rate

Max pressure: 2 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year Warranty