Samoa 70 Litre Hand Operated Mobile Oil Dispenser

The Cim-Tek Hydroglass Fuel Tank Filter is designed to remove water and particles up to 10 micron, especially for use with biodiesel or fuel with a high bio content. Unlike the Hydrosorb filters which use a paper element, the Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel filter also benefits from a higher dirt holding capacity which results in longer element life.

These fuel storage tank filters have a spin on cannister element, enabling the fuel filter element to be easily removed and replaced once it becomes full. Cim-Tek Hydroglass fuel tank filter includes two parts, static filter adapter (head) and an element. The All Cim-Tek filter components, including the replacement Cim-Tek 70024 element, are available individually as replacements.

The Cim-Tek 70024 fuel tank filter is designed for higher flow rate pump systems up to 100lpm. If a lower flow filter would be more suitable for your application, see the 70236 filter.

The Brass Inline Y Strainer is designed to protect pumping system components by filtering large debris particles. The body and cap of this inline fuel filter is constructed of brass, and has a removable 550 micron stainless steel strainer. These y strainers also have a brass drain point for the easy removal of the contaminants filtered out of the diesel or oil.

These Piusi bottom outlet IBC kits for AdBlue, are designed for connecting the bottom outlet of an IBC to the suction side of the pumping system. There are two options available, first is an external suction hose, which has 1.1m of additional hose after the check valve for connectiong to the pump, and the second option is a bottom connection kit which is designed for when you already have a suction hose.

The SAMOA Polaris Series transfer Pump is a self priming diesel pump with self-adjustable vanes, Pump body made of cast-iron with rustproof treatment, rotor of sintered steel and vanes of acetal resin.  The pumps include a by-pass valve and a built in filter with easy access for cleaning.  The pump can be mounted vertically or horizontally and has 1.8m cable with plug.

Inlet/outlet connection: 1" BSP (F) or flange coupling

Maximum suction lift: 2.5m

Pressure: 1.7 bar

230v - 50hz - 3 amp - 500 watt

Electric AC motor with IP55 protection, allow continuous operation duty.

On/off switch and fuse.