Samoa 16kg Multi Pressure Grease Bucket Pump Kit

The Viscomat Gear is an oil transfer pump, available in the single-phase and three-phase versions.
The available versions are suitable for all those applications requiring an oil transfer pump with high suction capacity in order to transfer fluids with medium-high viscosity.

HIGH PERFORMANCE

The high viscosity of the lubricating oil, unlike other types of fluids, needs to be transferred with greater strength. For this reason, the Viscomat Gear oil transfer system is characterized by the self-priming gear pump, capable of supporting and guaranteeing a steady flow rate and consistency in the flow dispensed with high viscosity, up to 2000 cSt with a flow rate of up to 14 l/min.

The continuous operation guarantees high suction capacity with pressure up to 25 bar. The internal profile gear pump has been designed as a valid and modern solution able to meet the different needs of pumping lube oils in the automotive field.

RELIABLE

The sintered steel rotor features gears that provide good strength to the rotor during transfer.

The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.

PRECISION AND QUALITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.

RELIABILITY

The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.

The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.

The Tanker Reeling Fuel Delivery Hose is designed for fitting onto domestic fuel oil tankers for the bulk delivery of kerosene and diesel fuels into a storage tank.

This fuel oil tanker hose is available in 61m assemblies with either M x M or M x F heavy duty brass couplings with aluminium hose clamps. It is also offered as an open ended coil should you wish to add your own hose fittings. Available upon special request is a 35mm OD version of this fuel dispensing hose.

The CIM 32DK Check Valve is a spring loaded, brass non return valve that can be used for heating, sanitary, compressed air systems, pumps and fuel distribution networks. These check valves are suitable for installation in vertical, horizontal or oblique pipelines to allow flow in one direction. The CIM 32DK range of non return valves have M x F BSP internal threads on both the inlet and outlet, and have Viton seals.