-
sales@northernstoragesolutions.co.uk
- Call: 01748 835276
- Drum Storage
- IBC Storage
- Fuel Storage Tanks
- Water Tanks & Storage
- Hazardous Storage
- Spill Control
- Spill Containment
- Garage Equipment
- Equipment & Accessories
- Brands
- Drum Storage
- IBC Storage
- Fuel Storage Tanks
- Water Tanks & Storage
- Hazardous Storage
- Spill Control
- Spill Containment
- Garage Equipment
-
Equipment & Accessories
- Fuel Transfer Pumps
- Diesel Pumps
- Petrol Pumps
- AdBlue Pumps
- Electric Transfer Pumps
- Manual Hand Pumps
- Flow Meters
- Mechanical Fuel Flow Meters
- Digital Fuel Flow Meters
- Fuel Pulse Meters
- Fuel Triggers & Nozzles
- Diesel Nozzles
- Petrol Nozzles
- AdBlue Nozzles
- Automatic Fuel Nozzles
- Manual Fuel Nozzles
- Fuel Hoses & Hose Reels
- Fuel Hoses
- Fuel Hose Reels
- Hose Fittings
- Brands
Piusi Self Service B.SMART Fuel Management System
These black iron pipe fittings are available in a number of sizes from ¼” M to 2” M.
The Piusi K400 digital fuel flow meter is designed to measure the quantity of diesel, oil or windscreen fluid that has been used. This accurate oval gear fuel counter meter is popular for the dispensing of oil in garage and workshop environments, as well as the low flow diesel transfer applications. Due to the operating principle of the oval gears Piusi K400 provides high degree of accuracy when measuring and reduced loss of pressure.
There are two separate versions available of the Piusi K400 fuel flow meter; one for use with diesel and oil, and another for windscreen fluid.
The Hytek SPT60A Diesel Transfer Pump is a low cost, high quality Fuel pump. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 56 Litre per minute maximum flow rate, the SPT60A from Hytek is an economical choice for diesel transfer.
Hytek 230v Diesel Pump Specification -
230v 50hz Pump
On / Off Switch
IP55 Weather Protection
2 Metre Power Cable
1" BSPP Female Inlet / Outlet
Duty Cycle: 30 minutes
56 L/min maximum flow rate
Integral Bypass valve
Suitable for Diesel or Biodiesel
2 Year Warranty
This Fuel Conditioner is suitable for tanks storing up to 40,000 litres of Diesel / HVO. A microbial growth called diesel bug forms when Diesel fuel isn't used, or is stored for long periods of time. This is caused by water in the fuel. The advanced fuel conditioner prevents this from happening by keeping the diesel free of contaminants which would otherwise cause damage to machinery and vehicles.
The fuel conditioner is engineered to obtain a target multi-pass ISO 14/13/11 level, with laboratory tests showing water content removal to under 60ppm. The unit comes with a Piusi Panther pump, two Cim-Tek Ultimate Defence particle and water filters, and a magnetic fuel conditioner to break up diesel bug sludge that forms when water enters and contaminates the diesel fuel.
The biggest benefit of this fuel conditioner over alternatives is it's operational intelligence to help prevent any downtime in fuel conditioning. There is a custom micro controller with a touch screen display for clear visual warnings of fuel filter degradation and blocks, the time until the next run cycle, an event and alarm log, and flow trends for filter life expectancy, allowing pre-emptive replacements of filters. The fuel conditioner has an input for a fuel tank alarm or gauge and leak detection probe to detect a low fuel level and leak, where if activated, the fuel pump will turn off until the issue is resolved, as well as two passive BMS outputs for remote warning of fuel filter block and low level/leak to alert the user that they need to take action.
The system run times are automatically set based upon the fuel tank size and run between 9am-5pm, Mon to Fri to ensure conditioning of 1.5 x the tank capacity per month. However this is customisable depending upon customer requirements.




.jpg)