Piusi SEC IBC Connector

The Adjustable Pressure Relief Valve is to be installed to complement pumps that have no internal bypass valve. The adjustable valve is designed to relieve excess liquid pressure back to the tank for applications requiring a nozzle to be used. Pressure gauges should be installed on the inlet to set the opening pressure for the pumping system.

Not to be used as a bypass recirculation system under constant pressure.

The Piusi Steel Hose Tail is male hose barb with NBR seals. These hose tails can be used with hoses that have either a 19mm or 25mm inner diameter. 

The Piusi Shark (SQUALO35) AdBlue pump is the first submersible pump specifically designed  for dispensing AdBlue™ from an AdBlue™ tank, rather than for water transfer. Firstly, it's 35lpm flow rate is the proven speed in the market for refilling vehicles and off road machinery with AdBlue, due to the smaller tank size than diesel. Also, thanks to its integrated bypass valve, this submersible AdBlue pump can be used with a nozzle without the added cost of buying a pressure relief valve. 

Reduced overall dimensions guarantee easy installation of this compact electric AdBlue™ pump, ideal for when there isn't room for a pump in the tank cabinet. The low 30mm suction level of the Shark offers almost complete emptying of the tank, exceeding that of alternative submersible AdBlue Pump models, and has a strainer to remove any debris that may have entered and sank to the bottom of the tank to prevent it from entering the pump or the vehicle SCR system. Thanks to it being a regenerative turbine pump, it benefits from pressure building capabilities ten or more times that of a centrifugal pump with the same impeller diameter and speed.The Piusi Shark also has a built in pressure regulator that optimises flow rate to reduce unnecessary energy consumption, saving the user on energy costs.

A version of this Piusi pump is available with a 6 minute timer, to prevent the pump from dry running damage in the event of the user forgetting to turn it off when they have finished dispensing. 

The Waste Oil Evacuation Pump Kits from SAMOA are designed to be used with the SAMOA remote discharge oil drainers to quickly empty the vessels into a waste tank. These kits can be used with other compatable systems, or as a standard waste oil extractor.

All Kits include -

Wall bracket

1.5m air connection hose with quick coupler and connector

1.5m discharge hose

1.5m suction hose with hydraulic connector

379100 - 1:1 Piston pump

559101 - DF100 Double Diaphragm Pump - 100 litres per minute

559501 - DP200 Double Diaphragm Pump - 200 litres per minute