Piusi Premium Manual IBC Diesel Pump Kit

The CTS AdBlue™ Tank Bund Alarm is an economy, entry level, battery powered AdBlue™ tank alarm system for alerting the user to fluid being detected between the inner tank and the outer bund. If only a bund alert is needed for your tank, this bund alarm is a simple, cost-effective solution and doesn't involve the other warnings associated with a fuel tank level alarm. A red LED will flash and a 90db alarm will sound to alert the user to fluid being detected in the bund - which can be caused by a tank ruputure/leak or rainwater collecting in the bund - meaning your bund will need cleaning and/or emptying.

This battery powered AdBlue™ bund alarm allows 72 hours of full alarm mode, making it ideal for unmanned sites and those with site closure on weekends. Further features include a weatherproof enclosure and test and alarm mute buttons to silence the sounder.

The Cleanfill 2" Overfill Prevention Valve from Lafon can be fitted to a tank as a piece of safety and environmental protection equipment. This overfill protection device can be used on fuel and diesel storage tanks that are filled by gravity flow or a pressure pump system. When the tank is full, the valve will close preventing any further fluid from being dispensed into the tank. There is also a version available to be used on AdBlue™ storage tanks, a fluid which is known as DEF in America and other countries.

The Piusi K700 mechanical fuel flow meter uses an oval gear system to accurately measure the amount of diesel dispensed, even at higher flow rates, which is indicated on its large mechanical display. Thanks to its maximum flow rate of 220lpm, the K700 fuel counter meter is designed for higher flow applications where larger volumes of fuel may be required to be transferred. Manufactured in Italy by Piusi, this diesel flow meter is a durable solution that is easy to fit and calibrate, and comes complete with an inlet filter for removing large debris.

The diesel fuel flow meter’s body can also be rotated to allow the flow from four directions, which makes this Piusi flow meter a flexible solution for a range of installations.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

100 Litres per minute maximum flow rate

Up to 2.2 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP54 Safety rating

FKM/NBR Seals

3 year warranty