Piusi K24 Turbine Pulse Meter

The K24 Flow Meter is a digital flow meter with a turbine suitable for AdBlue monitoring and the digital management of the fluid being dispensed.

PRECISION AND QUALITY

The K24 digital AdBlue flow meter has been designed to monitor the flow of AdBlue. Easy to install, in-line or at the end of the dispensing pipe, The K24 has a display that can be applied in various positions to facilitate easy reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually all working conditions.

RELIABILITY

The K24 Digital Flow Meter has a plastic body with a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with an LCD display shows a partial reading of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 litres per minute.

The K24 AdBlue flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, the K24 can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, the K24 can be adapted to any application and working condition.

This AdBlue™ Delivery Hose is a high quality solution designed for the dispensing of AdBlue™, otherwise referred to as DEF (diesel exhaust fluid). It is primarily used on manual AdBlue™ pump installations.

The Cleanfill 2" Overfill Prevention Valve from Lafon can be fitted to a tank as a piece of safety and environmental protection equipment. This overfill protection device can be used on fuel and diesel storage tanks that are filled by gravity flow or a pressure pump system. When the tank is full, the valve will close preventing any further fluid from being dispensed into the tank. There is also a version available to be used on AdBlue™ storage tanks, a fluid which is known as DEF in America and other countries.

The Husky AdBlue Safe-T-Break® couplings are designed to disconnect the hose and nozzle from the pump, in situations where the nozzle is still attached to the fill point and the vehicle drives off.

The Husky Safe-T-Breaks® prevent the whole AdBlue™ tank installation from being ripped away, therefore stopping AdBlue, otherwise known as DEF, from spilling out onto the floor.

This Husky breakaway coupling is 100% compatible with AdBlue and is re-usable, therefore helping to prevent damage and fuel spillages again and again once reconnected.