-
sales@northernstoragesolutions.co.uk
- Call: 01748 835276
- Drum Storage
- IBC Storage
- Fuel Storage Tanks
- Water Tanks & Storage
- Hazardous Storage
- Spill Control
- Spill Containment
- Garage Equipment
- Equipment & Accessories
- Brands
- Drum Storage
- IBC Storage
- Fuel Storage Tanks
- Water Tanks & Storage
- Hazardous Storage
- Spill Control
- Spill Containment
- Garage Equipment
-
Equipment & Accessories
- Fuel Transfer Pumps
- Diesel Pumps
- Petrol Pumps
- AdBlue Pumps
- Electric Transfer Pumps
- Manual Hand Pumps
- Flow Meters
- Mechanical Fuel Flow Meters
- Digital Fuel Flow Meters
- Fuel Pulse Meters
- Fuel Triggers & Nozzles
- Diesel Nozzles
- Petrol Nozzles
- AdBlue Nozzles
- Automatic Fuel Nozzles
- Manual Fuel Nozzles
- Fuel Hoses & Hose Reels
- Fuel Hoses
- Fuel Hose Reels
- Hose Fittings
- Brands
Piusi Grease Delivery Hose
The AdBlue™ Gravity Hose Kit is an all emcompassing solution for the dispensing of AdBlue™ from a bottom outlet, gravity fed installation.
Gravity hose kits are a cost effective solution for dispensing AdBlue™ (otherwise known as DEF) from an IBC rather than installing an AdBlue pump system. This is a popular solution for, but not limited to, the agricultural market.
This model of AdBlue™ gravity hose kit is made up of a choice of clear spiral of black EPDM AdBlue delivery hose with hose clips supplied, the Suzzara Blue manual nozzle and a 60 x 6 IBC bottom adaptor.
It's available in either 3m or 4m kits, to cater for how high off the ground the IBC in question is. You should not order a kit much longer than what is necessary for the height of the system, as any additional hose beyond this point may reduce the flow rate you could be achieving.
This Cim-Tek Filter Element is a replacement, 30 micron element for the Cim-Tek Hydrosorb fuel storage tank filter. This fuel tank filter element can be easily replaced to remove water and debris out of fuel continually.
This element is suitable suitable for the 70067 Cim-Tek Filter.
70 or 100 litre waste oil suction collection units with transparent chamber from SAMOA. Units include a 10 litres transparent chamber that can be used as a vacuum reservoir and allows an immediate inspection of the extracted waste oil. They can be used remotely once vacuum is created inside the steel reservoir. Discharge through a 1,5 m discharge hose pressurizing the unit. Includes safety valve to avoid over pressurization.
SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.
Electric motor power: 260w
Inlet/outlet connection: 1" BSP (M)
Maximum suction lift: 1.8m
Maximum delivery pressure: 1.6 bar
Maximum delivery: up to 32 l/min
