Piusi Clear Captor Particle Filter

The K24 Flow Meter is a digital flow meter with a turbine suitable for AdBlue monitoring and the digital management of the fluid being dispensed.

PRECISION AND QUALITY

The K24 digital AdBlue flow meter has been designed to monitor the flow of AdBlue. Easy to install, in-line or at the end of the dispensing pipe, The K24 has a display that can be applied in various positions to facilitate easy reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually all working conditions.

RELIABILITY

The K24 Digital Flow Meter has a plastic body with a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with an LCD display shows a partial reading of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 litres per minute.

The K24 AdBlue flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, the K24 can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, the K24 can be adapted to any application and working condition.

The EX75 is a higher flow version of the original Piusi EX50 ATEX approved fuel transfer pump. Designed specifically for the safe and efficient transfer of flammable liquids in a zone one environment, the EX75 12v fuel transfer pump satisfies the European directive for explosion proof equipment.

Primarily used as a petrol transfer pump, this model benefits from a sturdy, cast iron body and Italian quality manufacturing ensuring a long working life. It can be used for the mobile and static transfer of petrol, kerosene and diesel. This 12v fuel transfer pump is versatile and easy and safe to use in highly flammable environment. 

Designed for fuel dispensing and transfer, not fuel recirculation systems.

Please note: Power cables and connectors are dependent upon the individual site risk assessment for the connection method between the ATEX Piusi fuel pump and power source.

The Submersible AdBlue™ Pump has been designed to be installed in large AdBlue™ tank installations where increased head pressure is required. This is a popular AdBlue™ transfer pump solution for tank manufacturers, as being submerged into the fluid means the storage tank cabinet does not need to make room for a pump to be fitted. 

These electric AdBlue™ pumps are built from anti-corrosive materials with a three stage impeller, wear resistant shaft and an anti-debris stainless steel strainer. The seals within this AdBlue™ pump - known as a DEF pump in the US - have been designed to keep the urea pure and the electrical cable gland seal has been reinforced. The pump’s motor has excellent cooling properties and can be used even when the top of the motor becomes partially exposed.

The Piusi Open Automatic Oil Hose Reel is designed for high pressure oil dispensing systems in garage and workshop environments. Thanks to its sturdy steel structure and four way roller mechanism to stop friction wear to the hose when unrolling, this retractable oil hose reel is made to last even in heavy duty environments.

The Piusi open oil reels also benefit from adjustable arm brackets to allow for easy positioning and a hose stop for locking the hose at the desired length. Available with a choice of hose lengths or bare should the user wish to add their own specified hose, the Piusi retractable oil hose reel is suitable for a range of requirements.