Piusi Amalfi Water Transfer Pump - 24v

The Articulated Hose Swivel is designed with a multi-way swiveling action. This allows maximum hose movement within a confined space, and therefore reduces the pulling stress on the delivery hose. These hose swivels are manufactured from brass and alloy, and have NBR seals.

The CTS Fuel Tank Fill Point Cabinet is designed to securely lock away an oil or diesel storage tank's filling point from tampering and theft without making it difficult to view tank level readings. The unit comes complete with top entry 2” fuel tank fill point, level ball valve for isolation and filler cap to prevent dripping, as well as a removable drip tray with sight glass and easy grip handle, which can be opened even when the cabinet is locked to allow convenient emptying/cleaning at all times.

The benefit of the CTS diesel and oil fill point cabinet over alternatives on the market is its partial glass front. If an installed gauge is showing a low fuel level, anyone at the tank can identify that a fuel delivery is required even when the cabinet is closed. On other models with a full metal door this would go undetected until the cabinet was next opened, which could result in unexpectedly running out. As the glass front is only partial, the tank fillpoint is still secured out of sight and reach behind the lockable cabinet door. It is positioned so that if the glass is broken, no syphoning fitting can be attached. 

The diesel and oil fill point cabinet is designed to be installed onto the side of a steel storage tank, an external bund that the fuel tank sits on/inside or a wall in remote filling point scenarios. It is often used as a remote fill cabinet in oil heating installations where the tank is not easily accessed by the fuel delivery driver.

Please note: Alarms and gauges are to be purchased separately to allow for bespoke configurations. The fill point cabinet back plate has pre-threaded mounting holes for the simple installation of multiple alarms and gauges.

These Piusi bottom outlet IBC kits for AdBlue, are designed for connecting the bottom outlet of an IBC to the suction side of the pumping system. There are two options available, first is an external suction hose, which has 1.1m of additional hose after the check valve for connectiong to the pump, and the second option is a bottom connection kit which is designed for when you already have a suction hose.

Malleable Black Iron 90 degree elbows. Stock sizes from 1/2" to 2" BSP. Larger sizes on request.