2" SpillStop Overfill Prevention Valve

The Premium AdBlue™ Gravity Hose Kit is a high quality, ready-made solution for the dispensing of AdBlue™ from a bottom outlet, gravity fed installation. Gravity hose kits are a cost effective solution for dispensing AdBlue™ (otherwise known as DEF) from an IBC rather than installing an AdBlue pump system. This is a popular solution for, but not limited to, the agricultural market.

This model of AdBlue™ gravity hose kit is made up of the long life Piusi AdBlue™ delivery hose swaged onto ring clamps for durability, the Suzzara Blue manual nozzle, a 60 x 6 IBC bottom adaptor and cam fitting to enable the quick connection and disconnection of the kit from the IBC. It available in a number of lengths from 3m to 7m, to cater for how high off the ground the IBC in question is. You should not order a kit much longer than what is necessary for the height of the system, as any additional hose beyond this point may reduce the flow rate you could be achieving.

The CIM 30DK Check Valve is a spring loaded, non return valve designed for use with heating, sanitary, compressed air systems, pumps and fuel distribution networks. These check valves can be fitted in vertical, horizontal or oblique pipelines to allow the flow to go in one direction. These non return valves with Viton seals have F x F BSP internal threads on both the inlet and outlet. 

These steel pipe fittings are available in a number of sizes from ¼” F x F to 4” F x F.
 
 

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 110v transfer pump is designed for a long service life and is capable of a 5 metre suction.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Continuous Operation

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump with integral bypass

100 Litres per minute maximum flow rate

1.8 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

110v 50hz

Self resetting Thermal Protection

IP54 Safety rating

NBR 70 Seals

3 year warranty