3 Litre Oil Lifter Pump - 230v

This Oil Spill Kit contains all you need to simply and quickly deal with an oil spill in a portable and easy to access clip close carrier. Designed to absorb all hydrocarbon based oils, fuels, lubricants and petroleum based liquids, this emergency spill kit is a must have for wherever fuel or oil is stored, delivered or handled. Versions are available to clean up 10litres, 20litres and 40litres depending upon the individual requirements.

This Oil Spill Kit includes oil spill socks for containing the spill and stopping it spreading. These booms have a very flexible outer skin to ensure each have a high fluid absorbency of 7.5litres and high spill retention by moulding to the surface they are laid on. It also includes oil spill pads for absorbing the remaining fluid, each with a capacity of 1.1litres.

Due to their hydrophobic nature, the spill absorbents do not soak up water making them ideal for applications where water and oils must be separated. The spill pads remain buoyant in water, even when fully saturated, allowing them to absorb oil off the top.

The TigerLoop® De-aerator effectively removes all gas/air bubbles from the oil system, helping to eliminate any oil pump and nozzle problems associated with gas/air in the oil.

The TigerLoop® oil de-aerator preheats the oil by absorbing heat from the boiler room and friction heat from the oil pump, which reduces the problems associated with cold oil, gives cleaner combustion and enables reduced oil consumption.

This oil de-aerator has a single pipe design, meaning that no oil is transported back to the oil tank, and that any oil not required by the burner is re-circulated within the TigerLoop®.

Nozzle Capacity: 110 Litres per hour

Oil Flow: 230 Litres per hour

Maximum return oil: 120 Litres per hour

De-Aerating Capacity: 8 Litres per hour

Also refered to as a 'Tank Pack' or 'Bottom Outlet Kit' This filter assembly kit is a filter designed for heating oil tanks and comes complete with everything that is required to quickly and simply install it.

This kit has an optional Ultra Compact Isolation Valve, which is designed to replace the 1" x ½” conical fitting that is supplied in the standard kit. By doing this, the isolation valve becomes the first compotent to be screwed into the tank. This would allow an engineer to replace the filter without draining the contents of the tank should the filter ever need changing.