Nylon Basket Strainer

The Piusi SB325_X AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout nozzle will only allow fluid to pass once it has been magnetically opened by an AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.

The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.

This AdBlue dispensing nozzle also benefits from a breakaway spout mechanism. This means that if the vehicle accidently drives away with the nozzle still positioned in the vehicle's fill point, the spout will detach from the nozzle. This means that damage will be limited to the spout only which can be replaced as a spare part, and the AdBlue pump system connected to the storage tank will not be pulled away. Thanks to the integrated K24 digital flow meter, this AdBlue™ nozzle has the added functionality for the user to conveniently view how much fluid has been dispensed into the vehicle.

Constructed of plastic but with a sturdy, stainless steel spout, this Piusi nozzle is a lightweight, cost effective alternative to the completely stainless steel automatic AdBlue™ nozzles on the market. Like these more expensive models, it still reliably shuts off dispensing when the AdBlue tank becomes full to prevent any overspill.

The Plastic Tank Vent Cap is designed to fit over a 2” male thread on the top of an above ground fuel storage tank or drum to provide ventilation. These fuel tank vent caps are primarily used on heating oil tanks, and come with an additional 1 ½” female top thread that allows them a float gauge to be easily screwed into the top of it.

There is no internal thread on the bottom of this oil tank vent cap, so two screws are provided either side of the cap to allow you to cut into the male thread on the tank and hold it in place.

The Piusibox Portable 24v AdBlue™ Pump is a ready to dispense, portable pumping solution in a sturdy pull along box. This AdBlue™ transfer pump kit comes complete with delivery hose, manual nozzle, suction hose with strainer, providing the user with everything they need for the mobile refilling of their vehicle.

As its suction hose can be easily dropped into either a drum or IBC, the Piusibox AdBlue™ pump is ideal if there are multiple different containers on site. Thanks to its 2m cable and clips for connection to the vehicle’s battery, it does not need mains power to operate which has seen it become a popular solution in the agricultural and construction markets.

This Piusi pump’s protective box helps prevent contamination and aids transportation in heavy duty environments. To further prevent contamination, it comes with an AdBlue™ long life filter for removing any impurities and a pair of gloves.

This Female 60 x 6 DN61 IBC fitting is designed to connect to the bottom outlet of an IBC to convert a buttress thread to a Male BSP thread, and therefore enables the easy connection of dispensing equipment. With a polypropylene construction, these Male BSP fittings are available for use with AdBlue, Diesel, Oil, Water and Chemicals and comes in either of 1" M BSP or 2" M BSP versions.