MT Profil Float Gauge

The Piusi Viscomat Flowmat oil transfer pump with pressure switch combines the typical characteristics of gear pumps with the convenience of an automatic switch-off at the end of delivery. This allows the user to activate the fuel transfer pump without worrying about the need to switch the motor on and off. The performance of this Piusi pump guarantees good flow rates with high pressures, no pulsing, regular flow and silent operation. These oil transfer pumps can be used for both feeding single delivery points (with or without reels), and on fixed distribution systems.

The Plastic Hose Tail is available in two alternative versions. It can be supplied as a standard Male or Female BSP hose barb, or as a 90° version, which can also be Male or Female. These Piusi plastic hose tails are designed to be used during transfer of AdBlue™, and are suitable for hoses with a 19mm inner diameter.

70 or 100 litre waste oil gravity collection units From SAMOA. Discharge is done through a 1:1 pressure ratio pneumatic piston pump attached to the back of the unit reservoir and 1.5m hose with hydraulic type coupler.

The SAMOA Digital Preset Oil Nozzle is designed to make dispensing oil more accurate through use of it's automatically closing valve. The meter can be pre-set with up to 10 values to ensure the correct amount of oil is dispensed each time. The meter also has a memory function which shows the last 5 transactions, including the date, time and volume delivered.

This preset oil nozzle is suitable for Motor Oil, Hydraulic Oil, Gear Oil, Automatic Transmission Fluid (ATF) and Anti-Freeze Solutions.

Can be programmed to measure in Gallons, Quarts, Pints or Litres.