Mild Steel Barrel Nipple

The CTS Battery Operated Multi-Compartment Fuel Tank Alarm system has three functions; to detect and warn of a fuel storage tank overfill, a high/low liquid level and a bund leak. If the tank level alarm identifies that any of these states have occurred, the zone in question will illuminate on the alarm’s screen, and a loud siren and flashing red light will go off. When its battery is low, this level bund alarm will sound a single beep every minute to alert the user of this.

Thanks to being battery powered, these fuel tank alarms are designed to be installed on isolated or portable systems, and each zone can be configured allowing the alarm to be customised by the installer. Options are available that come with three relays, allowing additional equipment to be connected to the tank level alarm such as larger alarm systems or building management systems for remote monitoring.

If you need a tank level alarm for a fluid other than diesel or light oil, also available are a water and chemical alarm probe, and a high viscosity oil tank level probe – which is also suitable for AdBlue as well as high viscosity oils.

This single tank level alarm probe is designed for use with the CTS tank alarms, specifically to alert of either a high or low fluid level in water and chemical tanks. Constructed of polypropylene with a polyethylene cap, this tank level switch is suitable for use with many chemicals although we recommend that material compatibility should be checked.

The Piusi SB325_X AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout nozzle will only allow fluid to pass once it has been magnetically opened by an AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.

The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.

This AdBlue dispensing nozzle also benefits from a breakaway spout mechanism. This means that if the vehicle accidently drives away with the nozzle still positioned in the vehicle's fill point, the spout will detach from the nozzle. This means that damage will be limited to the spout only which can be replaced as a spare part, and the AdBlue pump system connected to the storage tank will not be pulled away. Thanks to the integrated K24 digital flow meter, this AdBlue™ nozzle has the added functionality for the user to conveniently view how much fluid has been dispensed into the vehicle.

Constructed of plastic but with a sturdy, stainless steel spout, this Piusi nozzle is a lightweight, cost effective alternative to the completely stainless steel automatic AdBlue™ nozzles on the market. Like these more expensive models, it still reliably shuts off dispensing when the AdBlue tank becomes full to prevent any overspill.

This Piusi Grease Control Nozzle is part of the new Piusi range for the lubrication market. This manual grease nozzle is for the dispensing point of an air operated grease pump installation, has a spring type pistol trigger and comes with a rigid spout hose with 4 jaw connector.