Indoor Drum Storage

Designed to hold four horizontal 205ltr drums on 2 levels, this drum store is manufactured from corrugated steel plate for additional strength. The 4 Drum stand has a fully seam welded sump that is fully compliant with all current UK regulations relating to sump capacities.

This store has two lockable, hinged doors with a gas strut supported lid to aid in opening and closing of the lid, and a locking bar to hold it open.

The base of the unit has fork hoops to aid with movement & keep the underside of the sump raised off the floor. The drums sit on cradles just above the sump, which is further protected by a raised back & side walls. The sump is fitted with a galvanised removable mesh grid deck.

The HD4D can be fitted with vents. Please contact us for more information.

Designed to hold horizontal drums, the base of this steel bunded drum store is manufactured from 3mm steel sheet with rectangular box section cross members and pressed ribs, a heavy duty Box section end frame with 2mm corrugated and has a fully seam welded sump which is further fitted with base plinths to eliminate contact with the ground and the unit is shot blasted before being painted RAL 6029 Green.

While the front of the unit is completely open to allow easy access, the rear is fitted with Stop Rails on each level to stop drums from being pushed through.

The sump of this unit fully complies with all the UK regulations relating to sump capacities.

The base of this steel bunded drum store is manufactured from 3mm steel sheet with rectangular box section cross members and pressed ribs, a heavy duty Box section end frame with 2mm corrugated panels and comes complete with galvanised support channels above the fully seam welded sump which is further fitted with base plinths to eliminate contact with the ground and the unit is shot blasted before being painted RAL 6029 Green.

The sump of this unit fully complies with all the UK regulations relating to sump capacities.

The floor area above the sump is covered with galvanised steel sections so that loose drums or pallets can be stored directly on to it. Whereas the upper shelf is an open box section construction, designed to hold pallets only. 

A mesh deck for the upper level is available on request. Please contact us for more information.

The base of this steel bunded drum store is manufactured from 3mm steel sheet with rectangular box section cross members and pressed ribs, a heavy duty Box section end frame with 2mm corrugated panels and comes complete with galvanised support channels above the fully seam welded sump which is further fitted with base plinths to eliminate contact with the ground and the unit is shot blasted before being painted RAL 6029 Green.

The sump of this unit fully complies with all the UK regulations relating to sump capacities.

The floor area above the sump is covered with galvanised steel sections so that loose drums or pallets can be stored directly on to it. Whereas the upper shelf is an open box section construction, designed to hold pallets only. 

A mesh deck for the upper level is available on request. Please contact us for more information.

Designed to hold two vertical 205ltr drums, this drum store is manufactured from 2mm steel plate, and comes fitted with a galvanised removable mesh grid deck. The 2 drum store also has a fully seam welded sump that is fully compliant with all current UK regulations relating to sump capacities.

The base of the unit has fork hoops to aid with movement & keep the underside of the sump raised off the floor. The drums sit on the mesh deck, and are surrounded by lockable doors and lid. The lid comes fitted with a metal door stay to keep the lid raised when in use.

The VD2D can be supplied with integral vents on request. Please contact us for more information.

Designed to hold four horizontal 205ltr drums on 2 levels, this spill pallet is manufactured from corrugated steel plate for additional strength. The 4 Drum stand also has a fully seam welded sump that is fully compliant with all current UK regulations relating to sump capacities.

The base of the unit has fork hoops to aid with movement & keep the underside of the sump raised off the floor. The drums sit on cradles just above the sump, which is further protected by a raised back & side walls.

The HD4 can be equipped with a sliding carriage to aid the loading and unloading of drums. Please contact us for more information.

The base of this steel bunded drum store is manufactured from 3mm steel sheet with rectangular box section cross members and pressed ribs, a heavy duty Box section end frame with 2mm corrugated panels and comes complete with galvanised support channels above the fully seam welded sump which is further fitted with base plinths to eliminate contact with the ground and the unit is shot blasted before being painted RAL 6029 Green.
The sump of this unit fully complies with all the UK regulations relating to sump capacities.