High Capacity ATEX Bare Hose Reel

The MT Profil Fuel Tank Float Gauge from Afriso is a small mechanical clock gauge for measuring the tank's contents by a float that sits on the fuel and goes up and down with the level. Whilst also popular for diesel storage tanks, it is most commonly used as a domestic heating oil tank gauge. The small display shows a scale of Empty 1⁄4, 1⁄2, 3⁄4 and Full for factory calibrated versions, allowing the user to quickly identify the approximate fuel tank level.

This oil tank level gauge is available in different versions depending upon the specific height of the fuel tank, or there is an 8'0 adjustable version. The 8'0 adjustable version of the MT Profil oil tank float gauge displays the level reading in cm, and has a reversible display which goes to 150cm max on one side, and 250cm max on the other.

These oil tank gauges are supplied as standard with 1 1⁄2” BSP Male for easy fitting on the top of the storage tank or drum. If your tank has a 2" BSP hole, you can fit this gauge by purchasing a 2" x 1 1/2" reducing bush. If your tank has a vent hole, you can connect the gauge by fitting a 2" barrel nipple into the hole and adding a combi vent cap which has a 1 1/2" BSP thread to screw in the gauge to prevent an additional hole being drilled.

Loxeal 18-10 Pipe Sealant is an anaerobic methacrylate adhesive that is easy to dismantle using hand tools once set, replacing the need for PTFE tape. This thread sealant is designed for the sealing of metal threaded pipe joints on equipment that may need to be removed from the installation for maintenance or replacement. For example, sealing hoses into pumps and nozzles as serviceability is required.

Loxeal 18-10 pipe thread sealant is shock and vibration resistant, and its sealing properties are unaffected between -55°C to +150°C. Its thixotropic property prevents migration from thread of the seal before or during curing, and easy dismantling is assured even after years.

Please note curing rate and strengths depend on the assembly clearance, material, surfaces and temperature.

70 or 100 litre waste oil suction collection units with transparent chamber from SAMOA. Units include a 10 litres transparent chamber that can be used as a vacuum reservoir and allows an immediate inspection of the extracted waste oil. They can be used remotely once vacuum is created inside the steel reservoir. Discharge through a 1,5 m discharge hose pressurizing the unit. Includes safety valve to avoid over pressurization.

The Piusi EXGO! ATEX fuel pump is a 12v fuel transfer pump for flammable liquids. Designed to be OEM integrated into a fuel system in a zone one environment, these ATEX pumps are the ideal solution for small mobile tanks and refuelling small vehicles. This petrol transfer pump has a sturdy, cast iron body, and thanks to its quality manufacturing has a long life span. This 12 volt fuel transfer pump has an integrated bypass valve and thermal protected motor.

Due to regulations this unit is not supplied with battery connectors and is required to be connected into a 12v supply by a qualified electrician.