Groz Particle Filter Element

The Husky 1690 Diesel Nozzle is an extremely heavy duty, automatic nozzle for high flow, bulk fuel transfer for applications including rail, tanker or filling fuel storage tanks. Specially designed for heavy duty applications, this Husky fuel nozzle benefits from a right angle design allowing the nozzle to fit close to walls and corners and has a large hand opening to accommodate for gloves. An added advantage is that it is 30% lighter than other models on the market.

A further feature of the 1690 fuel nozzle is its dual poppet, which allows for the easy opening of the trigger nozzle even when high system pressure is present due to higher flow. Please note models with swivel may have a slightly reduced flow rate.

The Alloy Diesel Bowl Filter is constructed from heavy duty aluminium and has an incorporated stainless steel basket strainer. It is a 180 micron inline filter, fitted with a bottom drain plug to easily remove the collection of impurities which have been filtered out. This diesel particle filter, also suitable for biodiesel up to B30, has a maximum flow rate of 300lpm and a maximum pressure of 6.5 bar.

The Husky Safe-T-Break® couplings are designed to disconnect the hose from the pumping system, in scenarios where a vehicle drives off with a nozzle still connected to the fill point. These Safe-T-Breaks® stop the installation having the whole pump system ripped out, therefore preventing both damage and spillages of fuel.

This Husky breakaway coupling is not re-usable and should therefore be disposed of after the initial break – a cost effective way of ensuring damage to the system is prevented. 

The standard models of these Safe-T-Break® couplings are designed for use with diesel, with a 3/4" ATEX approved version available for petrol. 

The Adam Pumps PA2 80 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. 

Adam Pumps 230v PA2 80 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

80 L/min maximum flow rate

Max pressure: 2.5 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year warranty