Camlock Dust Cap

The Piusi A60 diesel nozzle is automatic fuel nozzle design for private, non-resale refuelling of vehicles. As an automatic fuel pump nozzle, it will shut off when the tank is full, preventing an overfill scenario and allowing the safe use of the integrated 3 positions stay open latch. The Piusi standard automatic diesel nozzle is a perfect solution for refuelling vehicles such as lorries, small commercial vehicles and machinery and passenger cars.

The Piusi Auto 60 refuelling nozzle is commonly used alongside Piusi Panther 56 diesel transfer pump. The fuel nozzle is also available as an A70 fuel nozzle with a higher flow rate, which is typically used with Piusi Panther 72 transfer pump.

These Piusi automatic fuel nozzles are well known in the market as a reliable and comfortable to handle solution, without the added cost that comes with the forecourt style brands. For higher flow rate versions of this Piusi automatic diesel nozzles please look at the related products.

Not suitable for gravity fed operation.

This single tank level alarm probe is designed for use with the CTS tank alarms, specifically to alert of either a high or low fluid level in water and chemical tanks. Constructed of polypropylene with a polyethylene cap, this tank level switch is suitable for use with many chemicals although we recommend that material compatibility should be checked.

The GOK Pressure Regulating Valve is designed for use on single appliance gravity feed systems, primarily oil heating, with a liquid head range between 2metres and 30metres. These pressure regulating valves have a fixed outlet pressure of 100 mbar for flow rates up to 20litres per hour.

The Piusi Cambiaolio Oil Extractor Pump is a portable, oil extraction unit designed for use in small workshops where clean, spill-free oil removal from vehicles is required. With these Piusi oil extractors, there is no need to lift the vehicle or to remove the sump plug, as the Cambiaolio’s probes insert into the dipstick port, allowing the oil to be sucked from the engine sump. The waste oil is collected in a 12 litre container, which is mounted on the wheeled trolley.