Diesel Transfer Pumps

 The ALPHA pump range are heavy duty ATEX certified diesel pumps which can be equipped with the comprehensive FC10 fuel management system, or easily be connected to a different system. Thanks to its robust construction, the ALPHA pumps will last years in service and are simple to maintain.

The unit can be modified to allow the holster to be mounted on either side, or the front of the unit.

Standard ALPHA pump specification -

4 Piston Flow Meter - +/- 0.25% Accuracy

LCD Display with back light. Shows up to 99,999.9 litres, totaliser shows up to 99,999,999 litres.

Uses virtually indestructable key tags - up to 65,000 on a system

Vehicle tag, odometer entry, odometer check & MPG calculation

Optional driver code &/or pin code entry 

GPRS modem for remote access

Web based software

Flexible report writer enables a wide range of fuel usage analysis by vehicle, department, vehicle type, fuel type, time & date 

Includes CO2 output readings

Multiple site capability & data consolidation

All features included as standard. No optional extras to purchase

Mobile app available for monitoring on phone or tablet

The Ultraflow Cast Iron Rotary Hand Fuel Pump is an economical and simple solution for the manual dispensing of diesel and oil primarily from a drum, but also from other types of storage tanks. These rotary vane type hand fuel transfer pumps are a popular choice for transferring fuel when cost effectiveness is important, when only small quantities need to be dispensed at a time, or when no mains power is easily available. This manual diesel transfer pump is supplied with a 2” M BSP drum adaptor and three part rigid suction downtube.

The Hi Flow Lever Hand Fuel Pump is designed for the dispensing of diesel and oil from various storage tanks and containers, and can be easily fitted to a drum thanks to its 2” BSP adaptor and down tube.

These hand fuel transfer pumps are popular where a reliable yet inexpensive solution is required, or where mains power is inaccessible at the dispensing point. Thanks to its good flow rate, this manual diesel transfer pump is often used for the transfer of larger volumes of fluid.

This diaphragm pump is designed as a bilge pump for surface mounting on the deck/bulkhead. Thanks to it's innovative design, the pump body & ports can be positioned in 96 different ways to ensure flexibility. 

As this is a diaphragm pump, it can be used with dirty fuels with solids up to 12.5mm (with 1” hose tails) or 18mm (with 1½ ” hose tails).

The Aluminium Rotary Hand Fuel Pump is a cost effective, lightweight and corrosion resistant option for dispensing diesel and oil from a drum or storage tank. This rotary vane style hand fuel transfer pump is an ideal solution when electricity supply is unavailable, or when the expense of a powered fuel pump is not deemed cost effective. Supplied with these manual diesel transfer pumps are a 2” M BSP drum fitting and three part rigid suction pipe for installing direct onto a drum.

The Semi Rotary Hand Fuel Pump is a popular choice for the manual transfer of diesel due to it being reliable, yet cost effective. This manual diesel transfer pump is available in a number of sizes with differing flow rates depending upon the individual customer requirements. Benefitting from sturdy cast iron construction, back plate lugs for easy mounting and removable inlet/outlet flanged, this hand fuel transfer pump is the ideal solution for many applications.

K0 - ½" F BSP Flanged inlet/outlet - 200ml per revolution

K1 - ¾" F BSP Flanged inlet/outlet - 300ml per revolution

K2 - 1" F BSP Flanged inlet/outlet - 400ml per revolution

K3 - 1 ¼" F BSP Flanged inlet/outlet - 520ml per revolution

K4 - 1 ¼" F BSP Flanged inlet/outlet - 780ml per revolution

K5 - 1 ½” F BSP Flanged inlet/outlet - 960ml per revolution

K7 - 2" F BSP Flanged inlet/outlet - 1630ml per revolution

The Piusi Stainless Steel Rotary Hand Fuel Pump is a new generation solution, acting as more sturdy and durable option for manually dispensing diesel and oil from a drum. This premium self-priming manual fuel transfer pump has a stainless steel outer casing and benefits from smooth operation thanks to its rolling handle grip and quality constructed internals. 

The inlet of this diesel hand pump benefits from a grooved locking mechanism for securing it onto the drum connector. This is to stop it from spinning on the drum whilst in operation; a problem common with cheaper solutions.

Available is a version of this hand fuel transfer pump with 3m delivery hose for dispensing directly into the vehicle, which comes with a swivel spout with on/off valve to close off the hose when delivery has finished to prevent spillage. There is also a version of this Piusi fuel pump without hose that has an “S” type spout that is ideal for dispensing straight into an oil jug.

The Bypass 3000 DC portable diesel transfer pump is required when only 12v or 24v power supply is available. This Piusi fuel pump is able to be mounted in various positions and has a range of optional accessories allowing a number of connection configurations (see accessories table). Due to the compact size and flexibility of these 12 volt fuel transfer pumps, they can be used for a number of applications including being installed onboard earth moving machinery and in bowsers or portable tanks for mobile refuelling in the agricultural, construction and off-road markets.

This Italian made 24v and 12v diesel transfer pump offers high performance and has been built to meet stringent OEM quality requirements such as being able to handle excessive vibrations common on off-road machinery. 

Thanks to its strong DC brush motor, the BP 3000 24v and 12v diesel transfer pumps have pump flow capabilities of up to 50ltr per min, whilst still tolerating any back pressure that may occur. This battery powered diesel dispensing pump is available with vertical push fits ports or horizontal push fit or threaded ports. The horizontal BP3000 has the same flow direction as the traditional Piusi Bypass 2000 refuelling pump, which when looking at the pump head is right to left, whereas the vertical is left to right. 

The Piusi Bypass 3000 DC portable fuel transfer pump is a handy dispensing solution, used as a mobile refuelling pump or for general diesel transfer when only battery power is available. Due to their compact size, the BP 3000 24 and 12v diesel transfer pumps are easy to carry and are supplied with a carry handle as standard.This 12 volt fuel transfer pump provides flow rate up to 50l/min, which make it ideal solution for refuelling vehicles and machinery on plant sites. It comes including 2m or 4m cable and clips are supplied allowing easy connection to the vehicle's battery, making this Piusi diesel pump portable and ideal for agricultural and construction site applications. 

Depending upon your installation, this 24v and 12 volt fuel transfer pump is available with vertical ports or horizontal/inline ports like with the previous Piusi Bypass 2000 pump. There are also both threaded and hose tail inlet/outlet versions for you to choose from, providing flexibility in its fitting. 

The Panther pump for transferring diesel is one of PIUSI's historical products. The Panther diesel transfer electric pump is available in the 56, 72 and 90 versions. The Panther diesel transfer pumps has been designed and engineered directly by the Piusi team to meet all those application requirements that need a high performance and durable product.

MADE IN ITALY QUALITY

The Panther diesel transfer pumps are versatile and can be applied in different sectors including automotive, transport, agriculture, workshop and construction. The Panther volumetric, rotary, self-priming vane transfer pump has a high seal and is reliable even in use at low temperatures. With its solid and resistant body, the Panther is an easy-to-install diesel transfer pump, suitable for applications in diesel dispensers and fixed fuel transfer systems, as well as other industrial applications.

The compact cast iron structure makes it the perfect solution for high performance and reliability.

MAIN FEATURES

In the range of diesel transfer pumps, Panther 56-72-90 is equipped with a by-pass valve for precise adjustment of the quantity of flow transferred, while dispensing, with a flow rate of up to 90 l/min. The vane pump with sintered steel rotor and acetal resin vanes, and the induction motor with aluminum casing make this diesel electric pump suitable for continuous cycle applications, up to 30 minutes, resulting in a reliable and quality product. The thermal protection protects it in case of motor overloads.

The Hytek SPT60A Diesel Transfer Pump is a low cost, high quality Fuel pump. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 56 Litre per minute maximum flow rate, the SPT60A from Hytek is an economical choice for diesel transfer.

Hytek 230v Diesel Pump Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: 30 minutes

56 L/min maximum flow rate

Integral Bypass valve

Suitable for Diesel or Biodiesel

2 Year Warranty

The Piusi Battery Kit DC portable diesel transfer pump is designed as a ready to use mobile refuelling pump solution for diesel dispensing from drums or small tanks to refuel vehicles. The Italian made 12 volt diesel transfer pump kit offers great high performance, due to its compactness, durability and ease of use.

These kits, which include BP 3000 24v or 12v fuel transfer pumps, are extremely popular in both agricultural and construction markets for refuelling plant machinery, tractors and other vehicles.

All models of these battery powered Piusi diesel pumps come complete with cable and clips for connection to the battery of the vehicle being refuelled, carry handle, manual nozzle, suction/delivery hose and strainer.

There are a number of alternatives available differing based upon whether horizontal or vertical ports are suitable, whether a 24 or 12 volt fuel transfer pump is required.