HP80 Diaphragm Hand Fuel Transfer Pump

The Piusi Air Operated Oil Drum Pump Kit is the “Pro + Silent” air oil pump within a wall mounted kit ready to connect and dispense from a drum in garage and workshop environments. This wall mounted stub air powered oil transfer pump comes with a K400 nozzle meter for easily identifying the amount dispensed, a hose reel with long length hose for reaching further away bays and a drum suction kit. The drum suction kit comes with suction down tube, 2" BSP bung adaptor and suction hose to connect the wall mounted air operated oil pump and the drum. 

These Piusi pump kits are available with either a 3:1 air oil pump for pumping medium viscosity oils over short to medium distances, or a 5:1 version for medium to high viscosity oils over medium to long distances.

The Piusi Suzzara Blue Electric AdBlue™ Drum Pump is designed for the dispensing of AdBlue™ (DEF) specifically from a drum. Thanks to its spring-loaded Stainless Steel plate, this Adblue™ transfer pump can be securely top mounted onto a drum, ensuring protection against any accidental impact that otherwise could knock the pump off the drum and cause damage.

Complete with delivery hose, manual nozzle, suction downtube and AF2 Trisure drum connector, this electric AdBlue™ pump can be easily disconnected and moved between AdBlue™ drums as a ready to dispense kit. It also benefits from an anti-drip nozzle holster for the clean storage of the nozzle when refilling has finished.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off swtich, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

60 Litres per minute maximum flow rate

Up to 1.8 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP66 Safety rating

FKM/NBR Seals

3 year warranty

SAMOA Solura Blue 12v DC multi-diaphragm pump with no mechanical seals designed for dispensing AdBlue®/DEF and other water-based non corrosive products. Pump is self-priming and has a by-pass valve. Electric motors have IP55 protection and include on/off switch, fuse and 2m cable and crocodile clips.

Electric motor power: 260w

Inlet/outlet connection: 1" BSP (M)

Maximum suction lift: 1.8m

Maximum delivery pressure: 1.6 bar

Maximum delivery: up to 32 l/min