Cim-Tek 70063 Hydrosorb Water/Particle Filter

The Submersible AdBlue™ Pump has been designed to be installed in large AdBlue™ tank installations where increased head pressure is required. This is a popular AdBlue™ transfer pump solution for tank manufacturers, as being submerged into the fluid means the storage tank cabinet does not need to make room for a pump to be fitted. 

These electric AdBlue™ pumps are built from anti-corrosive materials with a three stage impeller, wear resistant shaft and an anti-debris stainless steel strainer. The seals within this AdBlue™ pump - known as a DEF pump in the US - have been designed to keep the urea pure and the electrical cable gland seal has been reinforced. The pump’s motor has excellent cooling properties and can be used even when the top of the motor becomes partially exposed.

This Piusi fuel pump is a portable battery powered diesel transfer pump kit designed to fit easily onto a drum, which allows for mobile dispensing when mains power is unavailable. These 24v and 12 volt fuel transfer pumps come complete with automatic nozzle, nozzle holster, delivery hose, quick coupling and telescopic down tube. This is a popular DC diesel fuel transfer pump within the workshop, construction and agricultural industries.

These Piusi 24v and 12v fuel transfer pumps can be supplied with or without a fuel flow meter, and with either a Panther or Bi-Pump refuelling pump depending upon the flow rate requirements. Due to its compactness, durability and ease of use, this Italian made 24 and 12v diesel transfer pump kit offers great high performance. 

The Cim-Tek Filter Element is a replacement, 2 micron element for the Cim-Tek Hydroglass Bio fuel storage tank filter. This fuel tank filter element can be easily fitted as a spin on cartridge when you need a replacement.The 70lpm element is suitable for the 70232 Cim-Tek filter, whereas the 100lpm element is compatible with the 70037 Cim-Tek fuel filter.

Unlike the Cim-Tek Hydrosorb filters which use a paper element, the Cim-Tek Hydroglass alternatives make use of a high-performance fibre glass element for the more challenging nature of biodiesel. This Cim-Tek fuel tank filter also benefits from a higher dirt holding capacity which results in longer element life.

This high quality diesel transfer pump from FMT Swiss AG is manufactured from shock resistant Die-cast aluminium with extremely small tolerances. The small tolerances of this pump allow for great suction & pressure performance.

Fitted with an on/off switch, integral bypass & siphon protection, this 230v transfer pump is designed for a long service life and is capable of a 5 metre suction. The pump head is also rotatable 90 degrees in any direction, which gives the pump flexibility to be used in a wide range of applications.

This transfer pump from FMT has an encapsulated electric motor, which in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof.

Specification - 

Encapsulation of the electric motor, 

1.8 metre cable

1" BSP Inlet / Outlet

Self Priming Vane Pump

100 Litres per minute maximum flow rate

Up to 2.2 bar discharge pressure

5 Metre maximum suction height

Suitable for Fuel oils & Diesel

230v 50hz

Thermal Protection

IP54 Safety rating

FKM/NBR Seals

3 year warranty