Cim-Tek 70062 Hydrosorb Fuel Filter Element - 12 pack

The Husky X-Mate Diesel Nozzle is the entry level, automatic shut off model within the Husky nozzle range. Thanks to its smaller spout and good flow rates, it is ideal for the safe and efficiency refuelling of small commercial vehicles and passenger cars. As with all Husky fuel nozzles, the X-Mate comes with the patented Flo-stop® function for shutting off flow when the spout is raised above the horizontal or falls out the tank.

Two versions are available of this particular Husky nozzle; a smaller spout OD model for refuelling vehicles with difficult fill points and a larger OD model for standard applications. These automatic fuel pump nozzles come as standard with the patented Stream Shaper®; a device that reduces turbulence and velocity for a straighter fuel flow, ensuring less splash back spillage.

This fuel nozzle also benefits from a reinforced spout bushing and a sensing port that is positioned behind the spout end, ensuring that even when the spout is subject to excessive use, its sensitivity is not heightened causing nuisance click offs.

The Normond E Series Hydrostatic Fuel Tank Gauge is a fuel tank level indicator that is renowned for its application in commercial environments. Their incorporated manual pumping system makes these fuel tank level gauges suitable for hazardous environments as electricity is not needed.

The E Series Normand Gauges display the tank contents as a percentage, and are primarily used on storage tanks that have a height of up to 3 metres. For tanks over this height, and for liquids other than diesel, please refer to the G Series fuel tank contents gauge. These fuel tank gauges are available in a number of versions depending upon the height of the tank and the specific gravity of the fluid in your tank.

Heldite Jointing Compound is a pipe and thread sealant designed to effectively seal bolted, flanged or screwed joins and prevent leakage. This semi-permanent liquid compound is used throughout all engineering industries and in plumbing and heating, provided it isn’t in contact with potable water.

This is a non-abrasive joint sealant, meaning that it has no effect on any metal, rubber or any other materials that it is used on. It is available either in a 250ml tin with brush applicator integrated into the cap, or a small 7ml single use bottle that can be thrown away after use.

The Adam Pumps PA1 70 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 66 Litre per minute maximum flow rate, the PA1 70 from Adam Pumps is an economical choice for diesel transfer.

Adam Pumps 230v PA1 70 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

70 L/min maximum flow rate

Max pressure: 2 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year Warranty