Cim-Tek 70024 Hydroglass Water/Particle Filter

The ZVA Elafix 40 AdBlue™ Magnetic Tank Adaptor is designed specifically for the prevention of miss-filling AdBlue™/DEF into a diesel tank. This universal ISO certified magnetic collar fits into any vehicles’ AdBlue™ filler neck, so that when used in conjunction with an AdBlue magnetic nozzle such as the Piusi SB325 or ZVA AdBlue model, it will prevent you from being able to dispense into anything other than the AdBlue™ tank. In addition, the 19mm ID of the magnetic adaptor prevents larger spout diesel nozzles from fitting into the fill point to prevent miss-filling the other way round as well.

The miss-filling of AdBlue™ is a common, reoccurring issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials, and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.

Newly manufactured vehicles which use AdBlue™ should have had a AdBlue™ tank magnet incorporated into the fill point at the manufacturing stage. To check whether you already have a magnetic adaptor in your vehicle, hold something magnetic next to the AdBlue™ fill point and if you feel a magnetic pull, your vehicle already has one fitted. If there isn’t a magnetic pull, you will need to fit one of these Elafix AdBlue™ magnetic tank adaptors to reap the benefits of a magnetic AdBlue™ nozzle. 

The Piusi CF60 Fuel Tank Filter can be fitted to both the suction and delivery systems to ensure that clean, particle free fuel is dispensed. This oil and diesel filter has a spin on cartridge for easy installation and replacement. When a flow rate reduction is observed, these fuel storage tank filters for diesel and oil should be replaced to ensure that the filtration of the fuel is maintained. Available in the accessories table is the Piusi CF60 filter element only for replacing the existing one when full. 

The Camlock Male Adaptor with Hose Shank has either a 1” or 2” hose tail, and a 1” or 2” male cam respectively. Cam and groove couplings are designed to quickly connect and disconnect hoses without the use of tools, and offer a leak proof seal.

This Female 60 x 6 DN61 IBC fitting fits to the bottom outlet of an IBC in order to convert a buttress thread to a Male CAM fitting, enabling the easy connection of dispensing equipment. Available in 1" M CAM or 2" M CAM, it's constructed from polypropylene making it compatible with AdBlue, Diesel, Oil, Water and Chemical.