Bunded Fuel Storage

This 350-litre capacity vertical environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when additional tank technology is not a requirement. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

The Harlequin 350HQI Comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

4" lockable inspection/fill cap

32mm hole with cover for electronic gauge

Inner tank vent

10 Year guarantee

The WB is a Mild steel rigid container with a steel portable bund, fully welded with a mechanical handling base. A Hinged outer lid provides full access to an internal IBC and tank fittings. Both the inner and outer tanks are constructed from mild steel plate in compliance with BS EN 10025.

The inner tank provides the required storage area, Whilst the outer tank forms the required bund with a capacity of 110% of the total liquid being stored. These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

This 110 Litre Wheelie Bin comes with a Hand Pump, Contents Gauge and Wheels for easy transportation.

This 650 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

The WB is a Mild steel rigid container with a steel portable bund, fully welded with a mechanical handling base. A Hinged outer lid provides full access to an internal IBC and tank fittings. Both the inner and outer tanks are constructed from mild steel plate in compliance with BS EN 10025.

The inner tank provides the required storage area, Whilst the outer tank forms the required bund with a capacity of 110% of the total liquid being stored. These units are built to the same stringent standards as the UN approved Fuel Bank range, and capable of being lifted and transported around site when full.

This 190 Litre Wheelie Bin comes with a Hand Pump, Contents Gauge and Wheels for easy transportation.

This 1000 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

This 1350 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

This 1200 Litre Rototek 3C Centurion Bunded Oil Tank is ideal for the safe, secure and environmentally responsible storage of heating oil. Rotationally moulded in the United Kingdom from a high grade Medium Density Polyethylene which is tough, durable and UV Stabilised to prevent colour fade.

The tanks come fully assembled and with an optional installation kit, making the tank simple and ready to install by an approved engineer.*

*Please note that all oil tanks should be installed by a suitably competent person in accordance with statutory requirements.

These bunded oil tanks come with a 10 year warranty if installed by an Oftec Approved Engineer and subsequently inspected annually by an Oftec Approved Engineer.

Standard fittings and parts supplied with the tank:

1” BSP Bottom Outlet

2 x 2 Inch Vents

Lockable Manhole Lid

4” Inspection aperture with lockable screw cap

Optional Fittings:

Apollo Bund alarm with plug in receiver

Float Level Gauge

Atkinson Installation Kit Comprising of:

1-0.5 inch reducer

Fuel Filter with lever type isolation valve

PTFE and Heldite thread sealant

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when space is at a premium and additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 650HQI comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

10 Year Guarantee

This 1450-litre capacity vertical environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. It’s ideal for use when additional tank technology is not a requirement.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing. Moulded in handles allow for the tank to be transported quite easily.

The Harlequin 1450HQI Comes complete with -

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge #

Inner tank vent

10 year guarantee

This 650-litre capacity slimline environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up where space is at a premium. Equipped with a range of fittings, including an ultrasonic contents gauge and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent

Tuffa Tanks 1400 Litre Plastic Bunded Heating Oil Tanks are manufactured in the UK from Extremely durable, recyclable polyethylene and provide an economical solution to suit most installations. 

These Tuffa 1400 Bunded Oil Tanks come complete with -

2″ BSP fill connection with cap and chain

Vent

Float level gauge

Inspection lid

Lockable hinged flip lid

1″ bottom outlet

Tank fittings kit (1″ – 1/2″ adaptor, ball valve and filter)

This 1450-litre capacity vertical environment-friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. Equipped with a range of fittings, including an ultrasonic contents gauge and bottom outlet fitting kit this bottom outlet tank provides a complete solution for a fully compliant installation.

Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable, non-corrosive, simple to install and aesthetically pleasing.

Integrally bunded

Bottom outlet with 1" BSP(F) thread

16" lockable access lid

4" lockable inspection cap

2" fill point

32mm hole with cover for electronic gauge

Ultrasonic contents gauge

Bottom outlet fitting kit

LRC overfill prevention probe

Inner tank vent