-
sales@northernstoragesolutions.co.uk
- Call: 01748 835276
- Drum Storage
- IBC Storage
- Settlement Tanks
- Hazardous Storage
- Bunded Fuel Storage
- General Storage
- Spill Control
- Spill Containment
- Site Safety
- Tank Accessories
- Drum Storage
- IBC Storage
- Settlement Tanks
- Hazardous Storage
- Bunded Fuel Storage
- General Storage
- Spill Control
- Spill Containment
- Site Safety
-
Tank Accessories
- Flow Meters
- Mechanical Flow Meters
- Digital Flow Meters
- Pulse Meters
- Transfer Pumps
- Diesel Transfer Pumps
- Oil Transfer Pumps
- AdBlue Transfer Pumps
- Water Pumps
- Petrol Pumps
- Chemical Pumps
- Hand Pumps
- Electric Pumps
- Fuel Nozzles
- Diesel Nozzles
- Oil Nozzles
- Petrol Nozzles
- AdBlue Nozzles
- Water Nozzles
- Chemical Dispensing Nozzles
- Automatic Nozzles
- Manual Nozzles
- Tank Alarms & Overfill Valves
- Alarms
- Probes
- Overfill
- Fill Point & Vent Fittings
- Fuel Tank Fill Caps
- Fuel Tank Vent Caps
- Hose & Hose Reels
- Delivery Hose
- Suction Hose
- Hose Reels
- Hose Fittings
- Breakaway Couplings
- Camlock Couplings
- Tank Gauges
- Float Type Gauges
- Hydrostatic Gauges
- Electronic Gauges
- Sight Gauges
- Pipe Fittings
- Brass Fittings
- Stainless Steel Fittings
- Steel & Iron Fittings
- Fuel Management Systems
- Management Units & Systems
- Software & Accessories
- Valves
- Gate Valves
- Lever Ball Valves
- Pressure Valves
- Check Valves
- Solenoid Valve
- Drum/IBC Valves
- Cabinets
- Fill Point Cabinets
- Dispensing Cabinets
- Garage Equipment
- Pipe & Thread Sealants
- Thread Sealant
- Adhesive
- Pipe Sealant
- Filters & Conditioners
- Particle Filters
- Water & Particle Filters
- Heating Oil Filters
- Conditioners
- Mesh Filters
- De-Aerators
- Filter Spares & Elements
- Diesel Tank Filters
- Petrol Tank Filters
- AdBlue Tank Filters
- Oil Tank Filters
Brass Spring Check Valve
The K33 ATEX is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, the K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.
The ATEX mechanical flow meter has a 3-digit partial indicator, and a 6 digit totaliser.
PRECISION AND QUALITY
The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.
RELIABILITY
The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. The K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks. It can also be used by gravity, thanks to its low resistance to flow.
The K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as "1" and "2" according to directive 99/92/EC.
The Reservoir Sight Level Gauges are simple and cost-effective tank contents gauges that give an easy visualisation of the fluid level in a container. Comprised of a high visibility lens moulded in shatterproof, transparent polymide, this sight level tank gauge gives a clear and instant level indication.
Suitable for tanks containing most fluids, primarily oils, water and diesel, this tank level indicator is designed for both front and rear installation by just drilling two holes into the tank for the bolts. Once tightened, they provide a leak-free seal.
There are different size versions available of the reservoir sight level tank gauges depending upon the container's size and the level that the user wishes to monitor.
The Piusi SB325_X AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout nozzle will only allow fluid to pass once it has been magnetically opened by an AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.
The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.
This AdBlue dispensing nozzle also benefits from a breakaway spout mechanism. This means that if the vehicle accidently drives away with the nozzle still positioned in the vehicle's fill point, the spout will detach from the nozzle. This means that damage will be limited to the spout only which can be replaced as a spare part, and the AdBlue pump system connected to the storage tank will not be pulled away.
Constructed of plastic but with a sturdy, stainless steel spout, this Piusi nozzle is a lightweight, cost effective alternative to the completely stainless steel automatic AdBlue™ nozzles on the market. Like these more expensive models, it still reliably shuts off dispensing when the AdBlue tank becomes full to prevent any overspill.
This ready to fit fuel hose and nozzle kit comes with a Piusi Standard Auto 60 nozzle and premium diesel delivery hose, making it the ideal solution for when the hose and nozzle on existing fuel dispensing pumps needs replacing. Suitable for use with both diesel and oil applications, this fuel tank hose and nozzle comes in two different hose lengths for you to choose from – 4 or 6 meters.
The Auto 60 fuel pump hose and nozzle kit comes with an automatic fuel nozzle from Italian manufacturer Piusi, which shuts off when the vehicle tank being filled is full. This, combined with a premium hose and assemblies, with swaged stainless steel full ferrules and BSP hose tails with sealing o ring, makes for a premium solution for a replacement diesel nozzle and hose.