Brass Hose Tail

The Reservoir Sight Level Gauges are simple and cost-effective tank contents gauges that give an easy visualisation of the fluid level in a container. Comprised of a high visibility lens moulded in shatterproof, transparent polymide, this sight level tank gauge gives a clear and instant level indication.

Suitable for tanks containing most fluids, primarily oils, water and diesel, this tank level indicator is designed for both front and rear installation by just drilling two holes into the tank for the bolts. Once tightened, they provide a leak-free seal.

There are different size versions available of the reservoir sight level tank gauges depending upon the container's size and the level that the user wishes to monitor.

The Piusi CF100 Fuel Tank Filter can be installed at either end of a fuel dispensing system to remove particles from the diesel or oil being transferred. Thanks to its simple and quick spin on cartridge, this oil and diesel filter can be easily replaced once the flow rate slows and the filter becomes full.

The Ultra Compact Oil Tank Filter Kit is designed for bottom outlet domestic heating oil tanks to remove debris with instant isolation and no pollution risk. The kit is comprised of the Ultra Compact isolation valve, 50 micron oil filter, PTFE tape, Heldite and all of the fittings required for installation. 

On other oil tank filter assemblies, an isolation valve is not the first component screwed into the tank which means that if the filter valve needs replacing then the tank needs to be drained. By having the Ultra Compact valve installed first, this filter assembly kit saves the engineer the couple of hours it would previously have taken to pump the tank out, replace the filter valve and then pump the heating oil back in. 

The Ultra Compact oil tank isolator valve is also available alone to replace the 1" BSPT x 1/2" BSPP adaptor if a generic filter kit is already installed. Both the filter kit and the valve alone can be retrofitted during service or at the time of the original tank installation. 

The Parker Carbopress Diesel Delivery Hose is a well-known brand of strong and durable fuel hose. Usually supplied as standard on the Piusi pump kits e.g. Cube, ST and Drum range, this diesel hose is often purchased as a replacement for an existing pumping installation. The Parker fuel dispensing hose is available in 4m and 6m assemblies as standard, but can also be purchased in coils or by the metre should you have differing requirements. A petrol version is also available.