Articulated Hose Swivel

This AdBlue™ Delivery Hose is a high quality solution designed for the dispensing of AdBlue™, otherwise referred to as DEF (diesel exhaust fluid). It is primarily used on manual AdBlue™ pump installations.

The Piusi AF2 drum connector and suction tube is a sturdy and solid option for dispensing from drums and IBCs. It consists of a 3 part downtube with flexible rubber junctions for easy adaptation to the height of the drum, and comes with a 3/4" 90° hose tail for direct hose connection. Integrated with a suction filter to prevent contamination, this drum connector and suction tube also has a breathing system to allow air to enter into the drum during suction. This Piusi suction tube has an internal ball mechanism to keep the pump primed and is available in two versions: Trisure and 2" BSP, depending upon drum type.

The Adam Pumps PA1 70 Diesel Transfer Pump is a low cost, high quality Fuel pump manufactured in Italy. Due to the design of this pump, it can replace similar types of pumps as the location of the Inlet/Outlet ports & Footprint of the pump are the same as many others. With a low noise output & a 66 Litre per minute maximum flow rate, the PA1 70 from Adam Pumps is an economical choice for diesel transfer.

Adam Pumps 230v PA1 70 Specification -

230v 50hz Pump

On / Off Switch

IP55 Weather Protection

2 Metre Power Cable

1" BSPP Female Inlet / Outlet

Duty Cycle: Continuous Duty

70 L/min maximum flow rate

Max pressure: 2 bar

Integral Bypass valve

-20/+50 °C maximum operating temperature

Suitable for Diesel Only

1 Year Warranty

The Pedrollo CK 50 is a high quality liquid ring pump manufactured in Italy. The CK series are suitable for use with Diesel, Clean water that doesn't contain any particles or with any liquids that aren't aggressive towards the materials the pump is made from.

Due to the specific principle of their operating performance, the Pedrollo CK 50 is an excellent solution in every case where a compact, self priming pump is required or where the fluid flow is irregular or contains air. 400v & model with bypass available on request.

Pump Body - Cast iron complete with threaded ports in compliance with ISO 228/1

Motor Bracket - Aluminium with brass insert (patented), reduces the risk of impeller seizure

Impeller - Brass star type with open radial vanes

Motor Shaft - Stainless steel EN 10088-3 - 1.4104

Mechanical Seal - Ceramic (stationary ring), Graphite (rotational ring) & Viton

Inlet / Outlet - 3/4" F BSP