Apollo Smart Ultrasonic Tank Gauge

The Piusi Steel Hose Tail is male hose barb with NBR seals. These hose tails can be used with hoses that have either a 19mm or 25mm inner diameter. 

The Stainless Steel Hose Tail is a heavy duty pattern, and is designed for use with more aggressive fluids such as AdBlue™. These hose tails can be connected to hoses that have inner diameters from 19mm up to 50mm. There is an option for this hose barb to come with a swivel connection.

Smaller sizes available on request.

The GoldenRod Fuel Tank Filter Wrench is a handy tool, which enables the easy removal and fitting of the GoldenRod bowl/filter housing when the user needs to replace the filter element inside. It benefits from small grooves that fit over the notches on the GoldenRod bowls, which are also compatible with the fitting of similar brands of bowl filters. 

The use of the filter wrench limits of the risk of cracking of the bowl whilst trying to apply pressure to screw it off. It also ensures that when it is screwed back on after replacing the element that it is tight enough to prevent leaks. 

The Piusi Shark (SQUALO35) AdBlue pump is the first submersible pump specifically designed  for dispensing AdBlue™ from an AdBlue™ tank, rather than for water transfer. Firstly, it's 35lpm flow rate is the proven speed in the market for refilling vehicles and off road machinery with AdBlue, due to the smaller tank size than diesel. Also, thanks to its integrated bypass valve, this submersible AdBlue pump can be used with a nozzle without the added cost of buying a pressure relief valve. 

Reduced overall dimensions guarantee easy installation of this compact electric AdBlue™ pump, ideal for when there isn't room for a pump in the tank cabinet. The low 30mm suction level of the Shark offers almost complete emptying of the tank, exceeding that of alternative submersible AdBlue Pump models, and has a strainer to remove any debris that may have entered and sank to the bottom of the tank to prevent it from entering the pump or the vehicle SCR system. Thanks to it being a regenerative turbine pump, it benefits from pressure building capabilities ten or more times that of a centrifugal pump with the same impeller diameter and speed.The Piusi Shark also has a built in pressure regulator that optimises flow rate to reduce unnecessary energy consumption, saving the user on energy costs.

A version of this Piusi pump is available with a 6 minute timer, to prevent the pump from dry running damage in the event of the user forgetting to turn it off when they have finished dispensing.