1000 Litre Harlequin ITE Slimline Bunded Oil Tank

This 1400-litre Fuel Station is an ideal choice for any on-site refuelling requirement. It’s environment-friendly bunded design allows it to safely store and dispense fuel in any small commercial, industrial or agricultural environment. This simple and easy to use diesel storage and dispensing solution is manufactured from high-quality mouldings and materials. It can be customised further by adding fuel dispensing accessories such as a mechanical flow meter, particulate filter and an electronic gauge.

Features:

Fully Bunded

56L/min 240Volt fuel pump

Mechanical flow meter

10Micron particulate & water filter

6m length; 1” delivery hose

Auto shut-off nozzle

Bulkhead light

2” BSP fill point

4” lockable inspection port

LRC overfill prevention probe

Electronic Level Gauge

Optional Extras (Additional Cost):

72L/min fuel pump

Fuel Management System

Installation:

Base Length: 1,450mm

Base Width: 1,450mm

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Manufactured in the UK from Mild Steel Plate, this Steel Bunded Heating Oil Tank is suitable for the storage of most fuels and light oils.

Included with this Bunded Oil Tank is -

Float Type Bund Gauge

Float Type Tank Contents Gauge

2" BSP Fill Point with Cap

2" BSP Tank Vent with Cap

1" BSP Base feed with Isolation Valve

1" BSP Return Point

Top Lift points (Lift empty only)

1" BSP Spare socket into bund

10 Year Guarantee

Optional Extras -

Top Feed Outlet

Fill Point Cabinet

Overfill Valve

Electronic Tank Gauges

Selenoid Valves

Day Tank Controllers

Pump Kits

Low Level Fill Points

This self bunding, steel oil storage tank is manufactured to comply with all current regulations.
Suitable for above ground instillations at Domestic, Commercial, Agricultural and industrial locations for storage of Paraffin, Kerosene, diesel oils and light lubricant oils.

Both the inner and outer tanks are constructed from mild steel plate to BS EN 10025.The inner tank providing the required storage area, the outer tank forms the required bund, with capacity of 110% of the total liquid being stored.

The tank vent is piped into the bund then to atmosphere further reducing the risk of spills in the event of overfilling the tank. Tanks are fitted with steel base supports to eliminate ground contact with the tank base. The tanks can also be fitted with steel legs to raise of the floor for gravity feed applications

Compliancy: BS799 part 5, Control of pollution (oil storage) (England) Regulations 2001, PPG2, PPG26.

Tuffa Tanks 6000 Litre Plastic Bunded Heating Oil Tanks are manufactured in the UK from Extremely durable, recyclable polyethylene and provide an economical solution to suit most installations. 

These Tuffa 6000 Bunded Oil Tanks come complete with -

2″ BSP fill connection with cap and chain

Vent

Overfill prevention valve

Watchman Sonic

600mm screw lid

Optional cabinet

1″ bottom outlet

The optional cabinet includes -

Battery Bund and Overfill Alarm

Hydrostatic contents gauge (replaces watchman)